Removing a titanium dental implant and replacing it with a CeraRoot zirconia implant

ceraroot vs titanium

Titanium Implant in the front without the crown and CeraRoot implant in the back without the crown.


The patient was very happy with the ceramic implant and preferred to have the metal titanium implant removed and replaced with a CeraRoot 100% ceramic (zirconia) and metal-free implant.


The crown can be seen on top of the CeraRoot ceramic implant.


The all-ceramic zirconia crown on the CeraRoot ceramic implant


Xray that shows the two CeraRoot implants in the mandible and one titanium metal implant on the lower right side of the mandible that the patient wants to have removed.


This is the first part of the procedure that is performed to remove the implant.


This is the second part 0f the procedure.


Of course to remove the titanium implant , the dentist has to put some local anesthesia next to the implant. But, the removing of the implant is not a complex procedure.


This is the implant how it looks like once it has been removed.



The area where the titanium implant is located, sometimes, it is necessary to make the hole a little bit larger for the new implant to be placed.



This is how the CeraRoot implant looks like once it has been placed where the titanium implant was.


Same day of surgery. The titanium implant is removed and on the same day the CeraRoot implant is placed.


Xray of the new CeraRoot 34 implant placed in the position of the old metal titanium implant.


The implant is protected for 2 months, while the bone is healing around the new implant. The patient chews on the plastic protector (Essix appliance) during the healing time.


The patient while have the new all-ceramic crown, on top of the new CeraRoot implant.

11206019_10205658463692473_4667676841121750151_n 11225719_10205658463452467_6943940367803049030_n11207282_10205658463132459_3231918799350549176_n

The crown is placed on the CeraRoot 34 (second premolar). The CeraRoot 16 is the white neck that shows through the gum.


The final xray with the osseointegrated CeraRoot 16 (left) and CeraRoot 34 (right)

Titanium Implant Removal Kit for minimally invasive extraction.
Available for purchase from our online store HERE.

8 thoughts on “Removing a titanium dental implant and replacing it with a CeraRoot zirconia implant

  1. Wow, this ceramic implant looks beautiful and clean. Thanks for the pictures, I can see how it looks like and how replacements are done. However, I have a question, is it as strong as the titanium?

  2. With this type of implant, what are the benefits of it over the one that was removed? I didn’t really see an explanation among the pictures. The pictures did provide a good visual on how the process was done so I commend you on that.

    1. Hello Sam Fisher, thank you for your comment. The first benefit is that the CeraRoot implant is 100% ceramic and does not suffer corrosion nor oxidation. The metal titanium implants are made of multiple parts where bacteria can accumulate and create gingival inflammation. Patients that do not like to have metals in their mouth or have metal sensitivity or allergy, this is the right treatment. Of course, before removing a titanium implant we encourage patients to have a MELISA TEST (blood test) performed to see to what extend there could be an allergy. Some patients simply prefer to remove the titanium metal implants, even if their blood test did not show allergy.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.